Monday, December 20, 2021
[bmwg] AD Review of draft-ietf-bmwg-ngfw-performance
https://datatracker. … g-ngfw-performance
My recent review of the latest IETF NGFW performance testing Draft for RFC:
I think these guys are way off base with no grasp of reality. If you just want a raw
number of what a firewall can do without any real world issues, then MAYBE it’ll work
although I would argue that point…
=========================================================
Tim copley
Dec 16, 2021, 1:59 PM (4 days ago)
to Warren, draft-ietf-bmwg-ngfw-performance, bmwg
I also, wanted to chime in regarding this and again, I also apologize for not reviewing earlier.
I’ve not really been too involved in security devices until the last couple years, but boy has it changed
drastically from when I was. Also, I noted that this document is basically following prior standards that
are also a bit out dated.
Some of the evolution, I’ve noticed which I think should at least be addressed in. I think you tried
to exclude these in the Scope.? However I’m not really sure you are covering but maybe 1/2 of the devices
that are being deployed at this time without addressing:
Virtualization. / Remote FWs in the next gen.
*) Large FWs are compartmentalizing Customers and serving multiple customers with the same firewall. So while
you have said what would happen to a customer when The Firewall is UT, you don’t really address what’s going
on with all the other customers on this DUT. If there are 10 Customers going through 1 large FW, what are the
other 9 experiencing when this is under Test. Would be interesting to have multiple parallel tests underway
and verify that behaviour is consistent across every “VDOM” within the system?
*) Time to Change. If things are changed during your Load profile.perhaps even on a different virtual Firewall
within the system,
*) Sandbox dips. Several of the firewall vendors send stuff through labs / temp work spaces either online or
offline that allow them to test against Zero Day scenarios. What happens to traffic flows during anomalies
in the traffic flows. Does it change the throughput of the DUT? I know this is kind of an open ended question.
but not sure you have good benchmark stats for a FW without it…
*) Cloud based scenarios. If the firewall is removed, and I’m not really sure how you would test this with
consistent results, but if the FW is offsite and the traffic is being routed through a Cloud based FW What does
that do to your traffic results?
TimC
Fruth Group
tcopley@fruthgroup.com
======================================================================
–
Timothy Copley
602.350.0633
Wednesday, September 8, 2021
Blacklist…..
One way I’ve done this….
root@azcopley:~# route add 84.38.129.0 gw 127.0.0.1 lo
For people I’ve noticed are attacking me..
Not sure about you. I know there are a lot of easier ways to do this. Some of the programs.. fail2ban and that kind of thing work wonders. However I’m a bit heavy handed :)
BLACKLIST=/tmp/blacklist GREP="/usr/bin/grep -Ev" IPT="/usr/sbin/iptables -A" /root/blacklistip.sh IPS=$($GREP "^#" $BLACKLIST) for IP in $IPS do $IPT INPUT -s $IP -j DROP $IPT OUTPUT -d $IP -j DROP done root@azcopley:~#
Call out IP addresses / backup the list so I don’t have to re-exmine those people I’ll eventually want to clean it out, so people re-using ip addresses don’t get blocked, but I really don’t supose that’ll happen real frequently.
cat blacklistip.sh #!/bin/sh CAT="/usr/bin/cat" GREP="/usr/bin/grep -i" AWK="/usr/bin/awk" UNIQ="/usr/bin/uniq" SORT="/usr/bin/sort" ATTACK="sshd" TMPFILE=/tmp/$ATTACK.attack BLACK="/tmp/blacklist" FILE="/var/log/iptables.log" # # Copy off previous $CAT $BLACK.new > $BLACK.old $CAT $FILE | $GREP $ATTACK | $AWK '{ print $11 }' > $TMPFILE.1 $CAT $TMPFILE.1 | $AWK -F "=" '{ print $2 }' >> $TMPFILE.2 $SORT $TMPFILE.2 > $TMPFILE.3 $UNIQ $TMPFILE.3 > $BLACK.new # # Only blacklist ones not done before.... # $AWK 'NR=FNR{a[$0];next}!($0 in a)' $BLACK.old $BLACK.new > $BLACK
Well, the list keeps growing…. Script kiddies. and the like.
cat /tmp/blacklist.new 103.108.87.133 103.218.3.18 103.228.183.10 103.254.198.67 103.3.226.166 104.131.84.222 104.40.217.239 106.116.118.89 106.12.119.1 106.12.125.241 106.12.166.166 106.12.179.191 106.12.211.254 106.12.214.145 106.12.99.204 106.13.167.62 106.13.176.163 106.13.35.232 106.13.44.83 106.13.45.212 106.13.78.7 106.51.98.159 106.52.42.153 106.53.89.104 106.54.127.61 106.54.200.209 106.75.141.160 106.75.28.38 111.203.196.62 111.229.43.27 111.230.231.145 111.230.29.17 111.231.238.83 111.231.69.68 111.40.217.92 112.21.188.235 112.3.30.119 112.35.77.101 114.4.227.194 114.80.94.228 117.50.5.198 117.50.77.220 118.24.88.241 118.25.91.168 118.89.219.116 118.89.78.131 119.29.104.238 121.229.18.144 121.66.252.158 122.152.208.61 122.155.17.174 122.51.10.222 122.51.245.240 122.51.34.199 122.51.39.232 122.55.190.12 123.59.199.45 124.152.118.131 124.93.160.82 124.93.18.202 128.199.107.114 128.199.164.253 128.199.99.204 129.204.51.77 129.28.183.62 13.71.21.123 131.108.60.30 132.232.53.85 138.117.179.134 138.219.129.150 138.68.22.231 139.59.10.42 139.59.87.250 140.143.233.29 140.207.96.235 140.86.12.31 142.93.140.242 145.239.83.104 145.239.87.35 150.136.160.141 150.158.122.241 152.136.152.45 152.32.144.26 152.67.47.139 157.230.163.6 159.65.176.156 161.189.144.43 162.0.225.199 162.243.237.90 162.251.23.43 164.132.42.32 164.163.99.10 165.227.203.162 167.114.114.114 170.210.121.208 171.244.51.114 175.24.49.130 176.197.5.34 176.31.162.82 178.128.221.85 178.128.56.89 178.128.57.147 178.32.115.26 179.191.123.46 18.220.207.167 180.168.212.6 180.76.138.132 180.76.186.109 181.123.177.150 181.46.80.183 183.195.121.197 183.81.152.109 185.107.95.231 185.129.148.43 185.165.169.168 185.20.82.2 185.254.207.197 188.168.82.246 190.210.62.45 191.189.238.135 192.35.168.195 192.35.169.20 192.99.12.24 193.112.28.27 194.204.194.11 195.54.160.99 195.54.161.15 198.98.61.68 2.36.136.146 200.204.174.163 202.147.198.154 203.151.146.216 203.177.71.254 203.185.61.140 206.253.166.69 209.126.124.203 211.108.69.103 211.90.37.75 212.51.148.162 213.184.249.95 213.204.124.71 213.217.0.177 216.126.58.224 217.182.94.110 223.240.109.231 35.201.150.16 35.241.72.130 37.187.3.53 41.223.4.155 41.63.0.133 41.93.32.94 43.241.238.152 43.248.124.132 45.118.151.85 45.14.150.103 45.157.120.16 45.170.73.13 45.92.126.74 46.101.40.21 49.232.136.245 49.232.33.182 49.232.59.246 49.233.33.118 49.233.84.128 49.235.151.50 49.247.196.128 5.196.70.107 5.249.159.37 51.178.51.36 51.38.126.75 51.38.188.63 51.68.227.98 51.75.18.212 51.79.44.52 51.79.70.223 51.79.85.142 51.83.75.97 51.91.100.120 54.37.75.210 58.87.78.80 59.13.125.142 60.167.180.193 60.2.224.234 61.12.26.145 61.160.107.66 61.183.139.155 62.171.148.78 62.210.119.215 62.234.167.126 62.4.21.144 65.78.99.127 66.70.205.186 77.122.171.25 79.137.34.248 79.17.217.113 80.211.246.93 84.2.226.70 89.154.4.249 89.248.168.51 91.121.211.59 92.222.156.151 93.148.0.91 94.103.80.118 97.90.110.160 root@azcopley:~#
E-mail Maint
Where is all my mail going for each account? PITA….
root@azcopley:/home# cat forward.sh #!/bin/bash ECHO="/usr/bin/echo" FILES="/home/*" for ENTRY in $FILES do $ECHO "ACCOUNT: " $ENTRY cat $ENTRY/.forward $ECHO "-----------------------------------------" done $ECHO "--------------------DONE------------------"
TO Here:
:/home# ./forward.sh ----------------------------------------- ACCOUNT: /home/acp timc@azcopley.com jeannie@azcopley.com ----------------------------------------- ACCOUNT: /home/ccp timc@azcopley.com jeannie@azcopley.com ----------------------------------------- ACCOUNT: /home/copleyproperties timc@azcopley.com jeannie@azcopley.com ----------------------------------------- ACCOUNT: /home/crac timc@azcopley.com jeannie@azcopley.com ----------------------------------------- ACCOUNT: /home/jeannie jeanniecopley@gmail.com ----------------------------------------- ACCOUNT: /home/jojoba timc@azcopley.com jeannie@azcopley.com ----------------------------------------- ACCOUNT: /home/mcp timc@azcopley.com jeannie@azcopley.com ----------------------------------------- ACCOUNT: /home/pcp timc@azcopley.com jeannie@azcopley.com ----------------------------------------- ACCOUNT: /home/tcp timc@azcopley.com jeannie@azcopley.com ----------------------------------------- ACCOUNT: /home/tim timc@azcopley.com ----------------------------------------- ACCOUNT: /home/timc ----------------------------------------- ACCOUNT: /home/timcopley timc@azcopley.com ----------------------------------------- ACCOUNT: /home/tuv timc@azcopley.com jeannie@azcopley.com ----------------------------------------- --------------------DONE------------------ home#
Monday, August 30, 2021
An Interesting AWK Script I wrote last night
Of course it’s for working with Chia!!! :)
HVAR=”Count by time taken” HEADER $GREP -i qualities $LONGPLOTS | $AWK {’print $11′} | $AWK -F. {’print $1′} | $SORT -n | $UNIQ -c | $AWK -v PER=”%” -v LONGP=”$LONGP” -v LOGELIT=”$LOGELIT” ‘{ printf(”%1g Sec - %1g CNT - %1.2g %0s Longplots %.2g %0s Totaln”, $2, $1, ($1 / LONGP * 100), PER, ($1 / LOGELIT * 100), PER) }’
RESULTS
Mon 30 Aug 2021 04:41:01 AM MST —————————————————————- – Count by time taken —————————————————————- 5 Sec - 750 CNT - 33 % Longplots 1.1 % Total 6 Sec - 523 CNT - 23 % Longplots 0.76 % Total 7 Sec - 135 CNT - 5.9 % Longplots 0.2 % Total 8 Sec - 93 CNT - 4.1 % Longplots 0.14 % Total 9 Sec - 42 CNT - 1.8 % Longplots 0.061 % Total 10 Sec - 46 CNT - 2 % Longplots 0.067 % Total 11 Sec - 138 CNT - 6.1 % Longplots 0.2 % Total
The awk script is basically parsing a temp file I created out of the log files
LONGPLOTS =/tmp/longplots.tmp
root@ms2:~/bin# grep qualities /tmp/longplots.tmp | tail -10 2021-08-23T07:02:09.920 harvester chia.harvester.harvester: WARNING Looking up qualities on /nas/h/plots/plot-k32-2021-06-01-02-23-8bbea0477b514310c244984ceef47b0f41e79e0dd3cf6b716fb1017d731ecf55.plot took: 21.72266125679016. This should be below 5 seconds to minimize risk of losing rewards. 2021-08-23T07:02:09.920 harvester chia.harvester.harvester: WARNING Looking up qualities on /nas/n1b/plots/plot-k32-2021-04-30-15-27-045de6d0fe1f16b3c478ac43575bd37c4d4a3b669aa00da6b8939b36935edf73.plot took: 21.722743272781372. This should be below 5 seconds to minimize risk of losing rewards. 2021-08-23T07:02:10.097 harvester chia.harvester.harvester: WARNING Looking up qualities on /nas/a/plots/plot-k32-2021-07-04-22-22-fa73ce855e1db23a577eb4be390581e324b4a64174ae4a692d5ce98b1cc96a5b.plot took: 12.023487567901611. This should be below 5 seconds to minimize risk of losing rewards. 2021-08-23T07:02:10.097 harvester chia.harvester.harvester: WARNING Looking up qualities on /nas/g/plots/plot-k32-2021-06-28-21-58-7f57303d0b82aefe6245b09517f6a9de8e92179c358c4596e0585882ed36997a.plot took: 12.023878574371338. This should be below 5 seconds to minimize risk of losing rewards. 2021-08-23T07:03:31.133 harvester chia.harvester.harvester: WARNING Looking up qualities on /nas/d/plots/plot-k32-2021-07-30-06-16-1ea66b80292c284646673762cfcb12a947835144163f311714d1dd9c8e7f97b2.plot took: 10.404966831207275. This should be below 5 seconds to minimize risk of losing rewards. 2021-08-23T07:05:13.834 harvester chia.harvester.harvester: WARNING Looking up qualities on /nas/d/plots/plot-k32-2021-07-27-22-53-c8272e00e88c8335f66e938c8341da0d945cb616dcbb5d676fd85e071589bf51.plot took: 8.03150486946106. This should be below 5 seconds to minimize risk of losing rewards. 2021-08-23T07:24:26.028 harvester chia.harvester.harvester: WARNING Looking up qualities on /nas/d/plots/plot-k32-2021-07-24-18-17-f3a865a801ca78540713d9262e581a5a8345ebf6a107fc35844fa9c9996ff13c.plot took: 5.538493394851685. This should be below 5 seconds to minimize risk of losing rewards. 2021-08-23T07:37:34.878 harvester chia.harvester.harvester: WARNING Looking up qualities on /nas/d/plots/plot-k32-2021-07-30-06-16-1ea66b80292c284646673762cfcb12a947835144163f311714d1dd9c8e7f97b2.plot took: 5.647717714309692. This should be below 5 seconds to minimize risk of losing rewards. 2021-08-23T07:57:19.040 harvester chia.harvester.harvester: WARNING Looking up qualities on /nas/d/plots/plot-k32-2021-08-02-22-02-933a77c8d839b0870b4c4611ec4d63158c4a46cb6c95eb4d120d61ec212ed110.plot took: 5.058545112609863. This should be below 5 seconds to minimize risk of losing rewards. 2021-08-23T08:24:42.001 harvester chia.harvester.harvester: WARNING Looking up qualities on /nas/d/plots/plot-k32-2021-08-04-11-08-6b21e8bb8ef0238ec8e6d0b04e22dc0f9b91fe80c21444406cedb1c8f70ad69f.plot took: 6.0560503005981445. This should be below 5 seconds to minimize risk of losing rewards.
Grabbing the 11th field with the first awk pass (The # of seconds for the plot confirmation)
(Grabbgint the Most significant digits of the 11th field. Which is # Seconds without decimal point) with the second awk.
Sorting that by the number of seconds taken.
uniq that list with counts for number of each second. (So I have a count of each # of seconds)
and then the final awk which is the interesting piece….
$AWK -v PER=”%” -v LONGP=”$LONGP” -v LOGELIT=”$LOGELIT” ‘{ printf(”%1g Sec - %1g CNT - %1.2g %0s Longplots %.2g %0s Totaln”, $2, $1, ($1 / LONGP * 100), PER, ($1 / LOGELIT * 100), PER) }’
In order for awk to use variables. I have to pass them to awk
LONGP is the Total number of plots that took over 5 seconds
LOGELIT is the Total number of plots.
PER is a percent sign. printf uses % as a secial character and I want to use it in my output….
Then I do a printf of the output I’d like to see followed by the list of variables.
printf statement
printf(”%1g Sec - %1g CNT - %1.2g %0s Longplots %.2g %0s Totaln”,
VARIABLE LIST
$2, $1, ($1 / LONGP * 100), PER, ($1 / LOGELIT * 100), PER)
Where $1 is the count of seconds
Where $2 is the Seconds
Where PER is a percent sign “%”
Where ($1 / LONGP * 100) is the percent of that second divided by # long plots
Where ($1 / LOGELIT *100) is the percent of that second dived by Total # plots
Simple really…. ;)
—————————————————————- – Chia Debug Plots taking too long all log files —————————————————————- LONGPLOTS = 2278 TOTAL Plots = 68662 Mon 30 Aug 2021 04:41:01 AM MST —————————————————————- – Count by time taken —————————————————————- 5 Sec - 750 CNT - 33 % Longplots 1.1 % Total 6 Sec - 523 CNT - 23 % Longplots 0.76 % Total 7 Sec - 135 CNT - 5.9 % Longplots 0.2 % Total 8 Sec - 93 CNT - 4.1 % Longplots 0.14 % Total 9 Sec - 42 CNT - 1.8 % Longplots 0.061 % Total 10 Sec - 46 CNT - 2 % Longplots 0.067 % Total
Full code / results below
root@ms2:~/bin# cat chia.status.sh #!/bin/bash # # Start Chia Environment # source /root/chia-blockchain/activate # # Progs I USe # ECHO=”/usr/bin/echo -e” # -e interupt escaped chars CAT=/usr/bin/cat CHIA=/root/chia-blockchain/venv/bin/chia WC=/usr/bin/wc LS=/usr/bin/ls TAIL=/usr/bin/tail HEAD=/usr/bin/head SORT=/usr/bin/sort TAIL=/usr/bin/tail DATE=`/usr/bin/date` DU=/usr/bin/du DF=/usr/bin/df PS=/usr/bin/ps DMESG=/usr/bin/dmesg AWK=/usr/bin/awk UNIQ=/usr/bin/uniq PLOTTIME=/root/bin/plottime STRING=Total GREP=/usr/bin/grep PS=/usr/bin/ps # # Variables # HOWMANY=10 # How many ports of phase information to report on each drive DRIVES=25 # How many drives to report free space on LOGL=10 # How much of each log file to see LOGH=100 # How many from the Header for Long lookup times PLOTDRIVES=”n1a n1b n2a n2b n4a n4b sc1a sc1b sc1c sc1d sc1e zero zero2 a b c d e f g h i j k” LOCALDRIVES=”a b c d e f” LOGFILES=”1 2 3 4 5 6 7 8 9 10” HEADER () { $ECHO “” $ECHO $DATE $ECHO “—————————————————————-” $ECHO “– “$HVAR $ECHO “—————————————————————-” $ECHO “” } DIVIDER () { $ECHO “” $ECHO “
” $ECHO “
” $ECHO “” } # # TEMP Files / log files # LOGFILE=/root/.chia/mainnet/log/debug.log LOGDIR=/root/.chia/mainnet/log LONGPLOTS=/tmp/longplots.tmp CHIACONS=/tmp/chiacons.tmp # $ECHO “” ####################################################### HVAR=”Chia Wallet Show” HEADER $CHIA wallet show | $GREP -v fingerprint | $GREP -v height ####################################################### HVAR=”Chia farm summary” HEADER $CHIA farm summary ######################################################### HVAR=”Chia Show Network Connections” HEADER $CHIA show -c > $CHIACONS $ECHO “FULL_NODE Connextions” $GREP FULL $CHIACONS | $WC -l $ECHO “” $ECHO “WALLET Connextions” $GREP WALLET $CHIACONS | $WC -l DIVIDER ####################################################### HVAR=”Drive Temp” HEADER $TAIL -11 /var/log/drivetemp.log | $SORT ######################################################## HVAR=”Plot Details” HEADER for CNT in $PLOTDRIVES do $DU -h /nas/$CNT/plots if [ $CNT == “n1b” ]; then $ECHO “”; fi if [ $CNT == “n2b” ]; then $ECHO “”; fi if [ $CNT == “n3e” ]; then $ECHO “”; fi if [ $CNT == “n4b” ]; then $ECHO “”; fi if [ $CNT == “sc1e” ]; then $ECHO “”; fi if [ $CNT == “zero2” ]; then $ECHO “”; fi done ######################################################## HVAR=”Drive Free” HEADER $TAIL -$DRIVES /var/log/drivefree.log | $SORT $ECHO “” $DF /dev/sdc2 | $GREP dev ######################################################### HVAR=”Memory Information” HEADER $CAT /proc/meminfo | $HEAD -n $HOWMANY ######################################################### HVAR=”DMESG | Tail - $HOWMANY” HEADER $DMESG | $TAIL -n $HOWMANY ######################################################### HVAR=”PSCPU10 | HEAD - 10” HEADER $PS -auxf | $SORT -nr -k 3 | $HEAD -n 10 ######################################################### HVAR=”Chia show PLOTing Processeses” HEADER $PS -elf | $GREP blockchain | $GREP -v grep DIVIDER ######################################################### HVAR=”Log Eligible & How Long” HEADER LOGELIT=`$GREP plots were $LOGFILE | $WC -l ` LONGPLOT=`$GREP losing $LOGFILE | $GREP qualities > $LONGPLOTS | $WC -l $LONGPLOTS| $AWK ‘{print $1}’ ` $LS -ltr $LOGDIR | $SORT +8 echo “——————————————————————-” $ECHO “debug 0: ” $LOGELIT for CNT in $LOGFILES do LOGELI=`$GREP plots were $LOGFILE.$CNT | $WC -l` LONGPLOT=`$GREP losing $LOGFILE.$CNT >> $LONGPLOTS | $WC -l $LONGPLOTS | $AWK ‘{print $1}’` $ECHO “debug $CNT: “$LOGELI LOGELIT=$(($LOGELIT + $LOGELI)) LONGPLOTT=$(($LONGPLOTT + $LONGPLOT)) done ######################################################## HVAR=”PLOT TIMES” HEADER $PLOTTIME ######################################################## HVAR=” PLOTs PER DAY” HEADER $CAT /var/log/plots.per.day ######################################################## HVAR=”Plot Total Times [a-h]” HEADER $GREP “Total time” /var/log/plot* $ECHO “” $ECHO “
” ######################################################## HVAR=”Plot Process per drive” HEADER for CNT in $LOCALDRIVES do $ECHO $DATE “Drive “$CNT”: Last:”$HOWMANY $ECHO “——————————————————————” $GREP phase /var/log/plot$CNT.log | $TAIL -$HOWMANY $ECHO “” $ECHO “” done DIVIDER ######################################################## HVAR=” CHIA Debug Log Warning / Error (LAST $LOGL)” HEADER $ECHO `$LS -l $LOGFILE` $ECHO “——————————————————————” $ECHO “FOUND Proofs :”; $GREP Found 1 proof $LOGFILE $ECHO “” $GREP ERROR $LOGFILE |$GREP -v peername | $GREP -v Failed to fetch | $GREP -vi closing connection |$GREP -v Traceback |$TAIL -40 $ECHO “” for CNT in $LOGFILES do HVAR=”CHIA Debug Log ( $CNT ) Warning / Error LAST $LOGL ” HEADER $ECHO `$LS -l $LOGFILE.$CNT` $ECHO “——————————————————————” $ECHO “FOUND Proofs :”; $GREP Found 1 proof $LOGFILE.$CNT $ECHO “” $GREP ERROR $LOGFILE.$CNT | $GREP -v peername | $GREP -v Failed to fetch | $GREP -vi closing connection | $GREP -v Traceback |$TAIL -$LOGL $ECHO “” done ######################################################## HVAR=”Total LOG Eligible Last $CNT log files = $LOGELIT” HEADER ####################################################### HVAR=”Chia Debug Plots taking too long all log files” HEADER LONGP=`$GREP qualities $LONGPLOTS | $WC -l` $ECHO LONGPLOTS = $LONGP $ECHO TOTAL Plots = $LOGELIT HVAR=”Count by time taken” HEADER $GREP -i qualities $LONGPLOTS | $AWK {’print $11′} | $AWK -F. {’print $1′} | $SORT -n | $UNIQ -c | $AWK -v PER=”%” -v LONGP=”$LONGP” -v LOGELIT=”$LOGELIT” ‘{ printf(”%1g Sec - %1g CNT - %1.2g %0s Longplots %.2g %0s Totaln”, $2, $1, ($1 / LONGP * 100), PER, ($1 / LOGELIT * 100), PER) }’ $ECHO “”
Mon 30 Aug 2021 04:41:01 AM MST —————————————————————- – Chia Wallet Show —————————————————————- Sync status: Synced Wallet ID 1 type STANDARD_WALLET Chia Wallet -Total Balance: 0.0 xch (0 mojo) -Pending Total Balance: 0.0 xch (0 mojo) -Spendable: 0.0 xch (0 mojo) Mon 30 Aug 2021 04:41:01 AM MST —————————————————————- – Chia farm summary —————————————————————- Farming status: Farming Total chia farmed: 0.0 User transaction fees: 0.0 Block rewards: 0.0 Last height farmed: 0 Local Harvester 1310 plots of size: 129.671 TiB Plot count for all harvesters: 1310 Total size of plots: 129.671 TiB Estimated network space: 35.727 EiB Expected time to win: 2 months Note: log into your key using ‘chia wallet show’ to see rewards for each key Mon 30 Aug 2021 04:41:01 AM MST —————————————————————- – Chia Show Network Connections —————————————————————- FULL_NODE Connextions 58 WALLET Connextions 2 Mon 30 Aug 2021 04:41:01 AM MST —————————————————————- – Drive Temp —————————————————————- 08.30.21.04.40:/dev/sda:33 08.30.21.04.40:/dev/sdb:34 08.30.21.04.40:/dev/sdc:33 08.30.21.04.40:/dev/sdd:34 08.30.21.04.40:/dev/sde:34 08.30.21.04.40:/dev/sdf:31 08.30.21.04.40:/dev/sdg:39 08.30.21.04.40:/dev/sdh:41 08.30.21.04.40:/dev/sdi:41 08.30.21.04.40:/dev/sdj:40 08.30.21.04.40:/dev/sdk:43 Mon 30 Aug 2021 04:41:01 AM MST —————————————————————- – Plot Details —————————————————————- 11T /nas/n1a/plots 9.9T /nas/n1b/plots 1.8T /nas/n2a/plots 1.9T /nas/n2b/plots 12T /nas/n4a/plots 12T /nas/n4b/plots 1.3T /nas/sc1a/plots 3.6T /nas/sc1b/plots 3.6T /nas/sc1c/plots 3.6T /nas/sc1d/plots 3.6T /nas/sc1e/plots 609G /nas/zero/plots 811G /nas/zero2/plots 7.2T /nas/a/plots 7.0T /nas/b/plots 406G /nas/c/plots 3.3T /nas/d/plots 3.3T /nas/e/plots 913G /nas/f/plots 11T /nas/g/plots 11T /nas/h/plots 11T /nas/i/plots 3.6T /nas/j/plots 3.6T /nas/k/plots Mon 30 Aug 2021 04:41:01 AM MST —————————————————————- – Drive Free —————————————————————- //cp1/zero 1913454044 1754140992 159313052 92% /home/zero //cp1/zero2 1441098196 1316590244 124507952 92% /home/zero2 /dev/sda1 7751366404 7652595324 98754696 99% /nas/a /dev/sdb1 7751366404 7613526628 137823392 99% /nas/b /dev/sdd1 3844659208 3677526672 167116152 96% /nas/d /dev/sde1 3844661068 3683797692 160846992 96% /nas/e /dev/sdf1 960385056 956600380 3768292 100% /nas/f /dev/sdg1 11625432492 11585587080 39829028 100% /nas/g /dev/sdh1 11625432492 11597845396 27570712 100% /nas/h /dev/sdi1 11625432492 11603558940 21857168 100% /nas/i /dev/sdj1 3844629500 3826289616 18323500 100% /nas/j /dev/sdk1 3844640564 3825653056 18971124 100% /nas/k //n1/n1a 31130140152 24618514728 6511625424 80% /nas/n1a //n1/n1b 31130140152 24304991880 6825148272 79% /nas/n1b //n2/n2a 7752457832 7262403900 490053932 94% /nas/n2a //n2/n2b 7752326760 7387896148 364430612 96% /nas/n2b //n3/n3a 3844660232 3826219484 18440748 100% /nas/n3a //n3/n3b 960380628 744113508 216267120 78% /nas/n3b //n4/n4a 58359505136 51391752944 6967752192 89% /nas/n4a //n4/n4b 58359505136 50772609888 7586895248 87% /nas/n4b //sc1/sc1a 3834087900 2905899404 928188496 76% /nas/sc1a //sc1/sc1b 3845578572 3826587384 18991188 100% /nas/sc1b //sc1/sc1c 3845578572 3826368252 19210320 100% /nas/sc1c //sc1/sc1d 3845578572 3826454204 19124368 100% /nas/sc1d //sc1/sc1e 3845578572 3833644088 11934484 100% /nas/sc1e /dev/sdc2 1921285344 632693660 1190925892 35% / Mon 30 Aug 2021 04:41:01 AM MST —————————————————————- – Memory Information —————————————————————- MemTotal: 32764796 kB MemFree: 302560 kB MemAvailable: 25767792 kB Buffers: 534716 kB Cached: 23971440 kB SwapCached: 483960 kB Active: 6342728 kB Inactive: 24266284 kB Active(anon): 4814680 kB Inactive(anon): 1297852 kB Mon 30 Aug 2021 04:41:01 AM MST —————————————————————- – DMESG | Tail - 10 —————————————————————- [858876.773836] CIFS VFS: n4 has not responded in 180 seconds. Reconnecting… [858877.285345] CIFS VFS: n2 has not responded in 180 seconds. Reconnecting… [858877.285366] CIFS VFS: n2 has not responded in 180 seconds. Reconnecting… [858877.797376] CIFS VFS: n1 has not responded in 180 seconds. Reconnecting… [858877.797400] CIFS VFS: cp1 has not responded in 180 seconds. Reconnecting… [858879.333476] CIFS VFS: n3 has not responded in 180 seconds. Reconnecting… [858879.333479] CIFS VFS: n3 has not responded in 180 seconds. Reconnecting… [931444.226591] EXT4-fs (sda1): error count since last fsck: 70 [931444.226605] EXT4-fs (sda1): initial error at time 1628798920: ext4_journal_check_start:61 [931444.226608] EXT4-fs (sda1): last error at time 1629311738: ext4_discard_preallocations:4094 Mon 30 Aug 2021 04:41:01 AM MST —————————————————————- – PSCPU10 | HEAD - 10 —————————————————————- root 1594572 61.9 4.1 1473596 1354392 tty1 DL Aug28 1211:11 /root/chia-blockchain/venv/bin/python /root/chia-blockchain/venv/bin/chia plots create -n 15 -r 2 -t /nas/b/chia/ -2 /nas/b/chia/ -d /nas/n1a/plots/ root 1594574 61.8 4.1 1473504 1354948 tty1 RL Aug28 1210:38 /root/chia-blockchain/venv/bin/python /root/chia-blockchain/venv/bin/chia plots create -n 10 -r 2 -t /nas/e/chia/ -2 /nas/e/chia/ -d /nas/c/plots/ root 1594573 51.7 0.1 252488 42936 tty1 DL Aug28 1012:22 /root/chia-blockchain/venv/bin/python /root/chia-blockchain/venv/bin/chia plots create -n 15 -r 2 -t /nas/d/chia/ -2 /nas/d/chia/ -d /nas/n1b/plots/ root 3075 6.5 5.5 2574676 1814172 ? Sl Aug18 1108:28 _ chia_full_node root 3073 1.2 0.1 3798812 59676 ? Sl Aug18 212:19 _ chia_harvester root 3074 1.0 0.1 306628 52540 ? SLl Aug18 175:19 _ chia_farmer root 175 1.0 0.0 0 0 ? S Aug18 176:35 _ [kswapd0] root 1831775 0.7 0.0 0 0 ? I 04:15 0:11 _ [kworker/u32:3-events_power_efficient] root 1828134 0.7 0.0 0 0 ? S 04:01 0:18 _ [kworker/u32:5+flush-cifs-3] root 1821438 0.5 0.0 0 0 ? I 02:42 0:40 _ [kworker/u32:0-events_unbound] Mon 30 Aug 2021 04:41:01 AM MST —————————————————————- – Chia show PLOTing Processeses —————————————————————- 4 R root 1594572 1 61 80 0 - 368399 - Aug28 tty1 20:11:11 /root/chia-blockchain/venv/bin/python /root/chia-blockchain/venv/bin/chia plots create -n 15 -r 2 -t /nas/b/chia/ -2 /nas/b/chia/ -d /nas/n1a/plots/ 4 D root 1594573 1 51 80 0 - 63122 generi Aug28 tty1 16:52:22 /root/chia-blockchain/venv/bin/python /root/chia-blockchain/venv/bin/chia plots create -n 15 -r 2 -t /nas/d/chia/ -2 /nas/d/chia/ -d /nas/n1b/plots/ 4 D root 1594574 1 61 80 0 - 368376 generi Aug28 tty1 20:10:38 /root/chia-blockchain/venv/bin/python /root/chia-blockchain/venv/bin/chia plots create -n 10 -r 2 -t /nas/e/chia/ -2 /nas/e/chia/ -d /nas/c/plots/ Mon 30 Aug 2021 04:41:01 AM MST —————————————————————- – Log Eligible & How Long —————————————————————- total 213816 -rw-r–r– 1 root root 9034328 Aug 30 04:41 debug.log -rw-r–r– 1 root root 20971610 Aug 29 23:54 debug.log.1 -rw-r–r– 1 root root 20971619 Aug 23 08:27 debug.log.10 -rw-r–r– 1 root root 20971615 Aug 29 10:00 debug.log.2 -rw-r–r– 1 root root 20971624 Aug 28 23:06 debug.log.3 -rw-r–r– 1 root root 20971540 Aug 28 02:26 debug.log.4 -rw-r–r– 1 root root 20971523 Aug 27 05:19 debug.log.5 -rw-r–r– 1 root root 20971822 Aug 26 09:53 debug.log.6 -rw-r–r– 1 root root 20971665 Aug 25 16:06 debug.log.7 -rw-r–r– 1 root root 20971532 Aug 24 22:00 debug.log.8 -rw-r–r– 1 root root 20971529 Aug 24 04:15 debug.log.9 ——————————————————————- debug 0: 1760 debug 1: 4908 debug 2: 3649 debug 3: 7887 debug 4: 8125 debug 5: 7439 debug 6: 6796 debug 7: 6876 debug 8: 6764 debug 9: 7582 debug 10: 6876 Mon 30 Aug 2021 04:41:01 AM MST —————————————————————- – PLOT TIMES —————————————————————- Drive a Drive b Total time = 8.95597 Hours CPU (61.960%) Sun Aug 29 05:02:54 2021 Total time = 9.02444 Hours CPU (61.140%) Sun Aug 29 14:21:16 2021 Total time = 8.98715 Hours CPU (61.490%) Sun Aug 29 23:37:27 2021 Drive c Drive d Total time = 10.5758 Hours CPU (53.410%) Sun Aug 29 06:40:05 2021 Total time = 10.53 Hours CPU (53.200%) Sun Aug 29 17:29:42 2021 Drive e Total time = 8.94114 Hours CPU (61.760%) Sun Aug 29 05:02:01 2021 Total time = 8.75893 Hours CPU (62.330%) Sun Aug 29 14:06:19 2021 Total time = 8.95444 Hours CPU (62.070%) Sun Aug 29 23:23:50 2021 Drive f Mon 30 Aug 2021 04:41:01 AM MST —————————————————————- – PLOTs PER DAY —————————————————————- 04.29.2021 = 2 04.30.2021 = 3 05.01.2021 = 3 05.02.2021 = 5 05.03.2021 = 4 05.06.2021 = 4 05.07.2021 = 6 05.08.2021 = 8 05.09.2021 = 8 05.10.2021 = 5 05.11.2021 = 6 05.12.2021 = 5 05.13.2021 = 4 05.14.2021 = 4 05.15.2021 = 4 05.16.2021 = 6 05.17.2021 = 1 05.18.2021 = 4 05.19.2021 = 8 05.20.2021 = 9 05.21.2021 = 2 05.22.2021 = 2 05.23.2021 = 4 05.24.2021 = 5 05.25.2021 = 8 05.26.2021 = 7 05.27.2021 = 9 05.28.2021 = 9 05.29.2021 = 8 05.30.2021 = 7 05.31.2021 = 7 06.01.2021 = 8 06.02.2021 = 4 06.03.2021 = 6 06.04.2021 = 9 06.05.2021 = 12 06.06.2021 = 10 06.07.2021 = 10 06.08.2021 = 9 06.09.2021 = 14 06.10.2021 = 9 06.11.2021 = 9 06.12.2021 = 8 06.13.2021 = 9 06.14.2021 = 10 06.15.2021 = 11 06.16.2021 = 11 06.17.2021 = 13 06.18.2021 = 13 06.19.2021 = 12 06.20.2021 = 17 06.21.2021 = 15 06.22.2021 = 12 06.23.2021 = 10 06.24.2021 = 12 06.25.2021 = 16 06.26.2021 = 9 06.27.2021 = 12 06.28.2021 = 15 06.29.2021 = 17 06.30.2021 = 12 07.01.2021 = 15 07.02.2021 = 16 07.03.2021 = 15 07.04.2021 = 21 07.05.2021 = 19 07.06.2021 = 17 07.07.2021 = 15 07.08.2021 = 8 07.09.2021 = 4 07.10.2021 = 8 07.11.2021 = 5 07.12.2021 = 8 07.13.2021 = 8 07.14.2021 = 6 07.15.2021 = 4 07.16.2021 = 7 07.17.2021 = 10 07.18.2021 = 6 07.19.2021 = 3 07.20.2021 = 7 07.21.2021 = 8 07.22.2021 = 10 07.23.2021 = 7 07.24.2021 = 7 07.25.2021 = 10 07.26.2021 = 14 07.27.2021 = 4 07.28.2021 = 7 07.29.2021 = 8 07.30.2021 = 7 07.31.2021 = 8 08.01.2021 = 9 08.02.2021 = 7 08.03.2021 = 7 08.04.2021 = 5 08.05.2021 = 5 08.06.2021 = 5 08.07.2021 = 4 08.08.2021 = 3 08.10.2021 = 3 08.11.2021 = 2 08.12.2021 = 3 08.13.2021 = 2 08.14.2021 = 2 08.15.2021 = 2 08.18.2021 = 2 08.19.2021 = 5 08.20.2021 = 4 08.21.2021 = 6 08.22.2021 = 4 08.23.2021 = 1 08.24.2021 = 3 08.28.2021 = 3 08.29.2021 = 5 Mon 30 Aug 2021 04:41:01 AM MST —————————————————————- – Plot Total Times [a-h] —————————————————————- /var/log/plotb.log:Total time = 32241.492 seconds. CPU (61.960%) Sun Aug 29 05:02:54 2021 /var/log/plotb.log:Total time = 32488.000 seconds. CPU (61.140%) Sun Aug 29 14:21:16 2021 /var/log/plotb.log:Total time = 32353.748 seconds. CPU (61.490%) Sun Aug 29 23:37:27 2021 /var/log/plotd.log:Total time = 38072.746 seconds. CPU (53.410%) Sun Aug 29 06:40:05 2021 /var/log/plotd.log:Total time = 37908.051 seconds. CPU (53.200%) Sun Aug 29 17:29:42 2021 /var/log/plote.log:Total time = 32188.105 seconds. CPU (61.760%) Sun Aug 29 05:02:01 2021 /var/log/plote.log:Total time = 31532.149 seconds. CPU (62.330%) Sun Aug 29 14:06:19 2021 /var/log/plote.log:Total time = 32235.976 seconds. CPU (62.070%) Sun Aug 29 23:23:50 2021 Mon 30 Aug 2021 04:41:01 AM MST —————————————————————- – Plot Process per drive —————————————————————- Mon 30 Aug 2021 04:41:01 AM MST Drive a: Last:10 —————————————————————— Mon 30 Aug 2021 04:41:01 AM MST Drive b: Last:10 —————————————————————— Time for phase 1 = 13360.807 seconds. CPU (80.830%) Sun Aug 29 18:20:54 2021 Starting phase 2/4: Backpropagation into tmp files… Sun Aug 29 18:20:54 2021 Time for phase 2 = 5862.213 seconds. CPU (52.650%) Sun Aug 29 19:58:36 2021 Starting phase 3/4: Compression from tmp files into “/nas/b/chia/plot-k32-2021-08-29-14-38-a10cbba19fd7b08d3d161cc7471b9c86cea9d2c907ca3681f6b81d3c45345274.plot.2.tmp” … Sun Aug 29 19:58:36 2021 Time for phase 3 = 12513.239 seconds. CPU (45.010%) Sun Aug 29 23:27:09 2021 Starting phase 4/4: Write Checkpoint tables into “/nas/b/chia/plot-k32-2021-08-29-14-38-a10cbba19fd7b08d3d161cc7471b9c86cea9d2c907ca3681f6b81d3c45345274.plot.2.tmp” … Sun Aug 29 23:27:09 2021 Time for phase 4 = 617.487 seconds. CPU (60.720%) Sun Aug 29 23:37:27 2021 Starting phase 1/4: Forward Propagation into tmp files… Sun Aug 29 23:54:21 2021 Time for phase 1 = 13477.976 seconds. CPU (80.980%) Mon Aug 30 03:38:59 2021 Starting phase 2/4: Backpropagation into tmp files… Mon Aug 30 03:38:59 2021 Mon 30 Aug 2021 04:41:01 AM MST Drive c: Last:10 —————————————————————— Mon 30 Aug 2021 04:41:01 AM MST Drive d: Last:10 —————————————————————— Starting phase 4/4: Write Checkpoint tables into “/nas/d/chia/plot-k32-2021-08-29-06-57-31693f42d45c99497ebd5fec38a248225627d1f48481ec83762bacccfd1bb83e.plot.2.tmp” … Sun Aug 29 17:16:03 2021 Time for phase 4 = 818.452 seconds. CPU (48.070%) Sun Aug 29 17:29:42 2021 Starting phase 1/4: Forward Propagation into tmp files… Sun Aug 29 17:47:46 2021 Time for phase 1 = 16527.715 seconds. CPU (64.920%) Sun Aug 29 22:23:14 2021 Starting phase 2/4: Backpropagation into tmp files… Sun Aug 29 22:23:14 2021 Time for phase 2 = 6313.381 seconds. CPU (49.460%) Mon Aug 30 00:08:27 2021 Starting phase 3/4: Compression from tmp files into “/nas/d/chia/plot-k32-2021-08-29-17-47-8068074c61b57228ab614da814083ab401412b26a9aab839794a90659b7f651d.plot.2.tmp” … Mon Aug 30 00:08:27 2021 Time for phase 3 = 14992.380 seconds. CPU (38.580%) Mon Aug 30 04:18:19 2021 Starting phase 4/4: Write Checkpoint tables into “/nas/d/chia/plot-k32-2021-08-29-17-47-8068074c61b57228ab614da814083ab401412b26a9aab839794a90659b7f651d.plot.2.tmp” … Mon Aug 30 04:18:19 2021 Time for phase 4 = 743.191 seconds. CPU (51.000%) Mon Aug 30 04:30:43 2021 Mon 30 Aug 2021 04:41:01 AM MST Drive e: Last:10 —————————————————————— Time for phase 1 = 13671.927 seconds. CPU (79.870%) Sun Aug 29 18:14:26 2021 Starting phase 2/4: Backpropagation into tmp files… Sun Aug 29 18:14:26 2021 Time for phase 2 = 5700.398 seconds. CPU (54.520%) Sun Aug 29 19:49:26 2021 Starting phase 3/4: Compression from tmp files into “/nas/e/chia/plot-k32-2021-08-29-14-26-a8c828506ec96c8e4370416d88b2604918cc99080d1ce1ae9ae56c8a88565365.plot.2.tmp” … Sun Aug 29 19:49:26 2021 Time for phase 3 = 12184.688 seconds. CPU (45.920%) Sun Aug 29 23:12:31 2021 Starting phase 4/4: Write Checkpoint tables into “/nas/e/chia/plot-k32-2021-08-29-14-26-a8c828506ec96c8e4370416d88b2604918cc99080d1ce1ae9ae56c8a88565365.plot.2.tmp” … Sun Aug 29 23:12:31 2021 Time for phase 4 = 678.961 seconds. CPU (57.110%) Sun Aug 29 23:23:50 2021 Starting phase 1/4: Forward Propagation into tmp files… Sun Aug 29 23:46:56 2021 Time for phase 1 = 13790.544 seconds. CPU (78.390%) Mon Aug 30 03:36:47 2021 Starting phase 2/4: Backpropagation into tmp files… Mon Aug 30 03:36:47 2021 Mon 30 Aug 2021 04:41:01 AM MST Drive f: Last:10 —————————————————————— Mon 30 Aug 2021 04:41:01 AM MST —————————————————————- – CHIA Debug Log Warning / Error (LAST 10) —————————————————————- -rw-r–r– 1 root root 9036178 Aug 30 04:41 /root/.chia/mainnet/log/debug.log —————————————————————— FOUND Proofs : Mon 30 Aug 2021 04:41:01 AM MST —————————————————————- – CHIA Debug Log ( 1 ) Warning / Error LAST 10 —————————————————————- -rw-r–r– 1 root root 20971610 Aug 29 23:54 /root/.chia/mainnet/log/debug.log.1 —————————————————————— FOUND Proofs : 2021-08-29T12:17:04.388 full_node full_node_server : ERROR Exception: [Errno 110] Connection timed out with 182.89.89.40 2021-08-29T14:37:59.723 farmer chia.farmer.farmer : ERROR Harvester did not respond. You might need to update harvester to the latest version 2021-08-29T17:06:37.572 full_node full_node_server : ERROR Exception: [Errno 110] Connection timed out with 173.28.202.79 2021-08-29T23:38:22.077 full_node chia.full_node.full_node: ERROR got weight proof request for unknown peak c0d69841dd7a1946a55057f37dc88d8500a233feeb9ae35f4dbe6d9c132e5df3 Mon 30 Aug 2021 04:41:01 AM MST —————————————————————- – CHIA Debug Log ( 2 ) Warning / Error LAST 10 —————————————————————- -rw-r–r– 1 root root 20971615 Aug 29 10:00 /root/.chia/mainnet/log/debug.log.2 —————————————————————— FOUND Proofs : 2021-08-29T00:12:02.820 full_node full_node_server : ERROR Exception: [Errno 110] Connection timed out with 111.40.59.242 2021-08-29T05:18:14.070 full_node chia.full_node.full_node: ERROR got weight proof request for unknown peak c51cf7f8964492ef67ae0341c3bd02709aacf14226241b261e9c8f45ffccaad6 2021-08-29T06:11:18.020 full_node full_node_server : ERROR Exception: [Errno 110] Connection timed out with 115.93.222.234 2021-08-29T09:14:50.116 full_node full_node_server : ERROR Exception: [Errno 110] Connection timed out with 114.225.91.68 Mon 30 Aug 2021 04:41:01 AM MST —————————————————————- – CHIA Debug Log ( 3 ) Warning / Error LAST 10 —————————————————————- -rw-r–r– 1 root root 20971624 Aug 28 23:06 /root/.chia/mainnet/log/debug.log.3 —————————————————————— FOUND Proofs : Mon 30 Aug 2021 04:41:01 AM MST —————————————————————- – CHIA Debug Log ( 4 ) Warning / Error LAST 10 —————————————————————- -rw-r–r– 1 root root 20971540 Aug 28 02:26 /root/.chia/mainnet/log/debug.log.4 —————————————————————— FOUND Proofs : 2021-08-27T07:43:33.765 full_node full_node_server : ERROR Exception: [Errno 110] Connection timed out with 110.87.81.123 2021-08-27T08:15:53.226 full_node full_node_server : ERROR Exception: [Errno 110] Connection timed out with 120.230.117.188 2021-08-27T09:22:12.484 full_node full_node_server : ERROR Exception: [Errno 110] Connection timed out with 176.33.69.46 2021-08-27T10:04:25.861 full_node full_node_server : ERROR Exception: [Errno 110] Connection timed out with 101.84.52.157 2021-08-27T11:29:09.904 harvester chia.harvester.harvester: ERROR Error using prover object badbit or failbit after reading size 8 at position 85292863315 2021-08-27T11:29:09.935 harvester chia.harvester.harvester: ERROR File: /nas/a/plots/plot-k32-2021-06-29-22-27-f488f56c75a93231e3942e3186880e4edfcc8bd4ef0ceda6f110800ad6f1220b.plot Plot ID: f488f56c75a93231e3942e3186880e4edfcc8bd4ef0ceda6f110800ad6f1220b, challenge: 66fe8b54531fd93788a1e53a61bf1000cd7c4ac8c8e5c73f596c1b4288e96693, plot_info: PlotInfo(prover=, pool_public_key=, pool_contract_puzzle_hash=None, plot_public_key=, file_size=108791552003, time_modified=1625034563.0319898) Mon 30 Aug 2021 04:41:01 AM MST —————————————————————- – CHIA Debug Log ( 5 ) Warning / Error LAST 10 —————————————————————- -rw-r–r– 1 root root 20971523 Aug 27 05:19 /root/.chia/mainnet/log/debug.log.5 —————————————————————— FOUND Proofs : 2021-08-26T10:30:00.837 full_node full_node_server : ERROR Exception: [Errno 110] Connection timed out with 182.126.202.236 Mon 30 Aug 2021 04:41:01 AM MST —————————————————————- – CHIA Debug Log ( 6 ) Warning / Error LAST 10 —————————————————————- -rw-r–r– 1 root root 20971822 Aug 26 09:53 /root/.chia/mainnet/log/debug.log.6 —————————————————————— FOUND Proofs : 2021-08-26T02:08:45.956 full_node full_node_server : ERROR Exception: [Errno 110] Connection timed out with 31.60.15.75 2021-08-26T03:42:11.332 full_node full_node_server : ERROR Exception: [Errno 110] Connection timed out with 5.173.241.35 Mon 30 Aug 2021 04:41:01 AM MST —————————————————————- – CHIA Debug Log ( 7 ) Warning / Error LAST 10 —————————————————————- -rw-r–r– 1 root root 20971665 Aug 25 16:06 /root/.chia/mainnet/log/debug.log.7 —————————————————————— FOUND Proofs : 2021-08-25T05:21:42.277 full_node full_node_server : ERROR Exception: [Errno 110] Connection timed out with 123.155.68.6 Mon 30 Aug 2021 04:41:01 AM MST —————————————————————- – CHIA Debug Log ( 8 ) Warning / Error LAST 10 —————————————————————- -rw-r–r– 1 root root 20971532 Aug 24 22:00 /root/.chia/mainnet/log/debug.log.8 —————————————————————— FOUND Proofs : Mon 30 Aug 2021 04:41:01 AM MST —————————————————————- – CHIA Debug Log ( 9 ) Warning / Error LAST 10 —————————————————————- -rw-r–r– 1 root root 20971529 Aug 24 04:15 /root/.chia/mainnet/log/debug.log.9 —————————————————————— FOUND Proofs : Mon 30 Aug 2021 04:41:01 AM MST —————————————————————- – CHIA Debug Log ( 10 ) Warning / Error LAST 10 —————————————————————- -rw-r–r– 1 root root 20971619 Aug 23 08:27 /root/.chia/mainnet/log/debug.log.10 —————————————————————— FOUND Proofs : Mon 30 Aug 2021 04:41:01 AM MST —————————————————————- – Total LOG Eligible Last 10 log files = 68662 —————————————————————- Mon 30 Aug 2021 04:41:01 AM MST —————————————————————- – Chia Debug Plots taking too long all log files —————————————————————- LONGPLOTS = 2278 TOTAL Plots = 68662 Mon 30 Aug 2021 04:41:01 AM MST —————————————————————- – Count by time taken —————————————————————- 5 Sec - 750 CNT - 33 % Longplots 1.1 % Total 6 Sec - 523 CNT - 23 % Longplots 0.76 % Total 7 Sec - 135 CNT - 5.9 % Longplots 0.2 % Total 8 Sec - 93 CNT - 4.1 % Longplots 0.14 % Total 9 Sec - 42 CNT - 1.8 % Longplots 0.061 % Total 10 Sec - 46 CNT - 2 % Longplots 0.067 % Total 11 Sec - 138 CNT - 6.1 % Longplots 0.2 % Total 12 Sec - 50 CNT - 2.2 % Longplots 0.073 % Total 13 Sec - 38 CNT - 1.7 % Longplots 0.055 % Total 14 Sec - 19 CNT - 0.83 % Longplots 0.028 % Total 15 Sec - 27 CNT - 1.2 % Longplots 0.039 % Total 16 Sec - 44 CNT - 1.9 % Longplots 0.064 % Total 17 Sec - 46 CNT - 2 % Longplots 0.067 % Total 18 Sec - 27 CNT - 1.2 % Longplots 0.039 % Total 19 Sec - 21 CNT - 0.92 % Longplots 0.031 % Total 20 Sec - 5 CNT - 0.22 % Longplots 0.0073 % Total 21 Sec - 4 CNT - 0.18 % Longplots 0.0058 % Total 22 Sec - 40 CNT - 1.8 % Longplots 0.058 % Total 23 Sec - 26 CNT - 1.1 % Longplots 0.038 % Total 24 Sec - 3 CNT - 0.13 % Longplots 0.0044 % Total 25 Sec - 13 CNT - 0.57 % Longplots 0.019 % Total 27 Sec - 24 CNT - 1.1 % Longplots 0.035 % Total 28 Sec - 10 CNT - 0.44 % Longplots 0.015 % Total 29 Sec - 21 CNT - 0.92 % Longplots 0.031 % Total 30 Sec - 3 CNT - 0.13 % Longplots 0.0044 % Total 31 Sec - 2 CNT - 0.088 % Longplots 0.0029 % Total 33 Sec - 24 CNT - 1.1 % Longplots 0.035 % Total 34 Sec - 5 CNT - 0.22 % Longplots 0.0073 % Total 35 Sec - 2 CNT - 0.088 % Longplots 0.0029 % Total 36 Sec - 5 CNT - 0.22 % Longplots 0.0073 % Total 38 Sec - 9 CNT - 0.4 % Longplots 0.013 % Total 39 Sec - 5 CNT - 0.22 % Longplots 0.0073 % Total 40 Sec - 9 CNT - 0.4 % Longplots 0.013 % Total 41 Sec - 8 CNT - 0.35 % Longplots 0.012 % Total 42 Sec - 3 CNT - 0.13 % Longplots 0.0044 % Total 44 Sec - 1 CNT - 0.044 % Longplots 0.0015 % Total 46 Sec - 3 CNT - 0.13 % Longplots 0.0044 % Total 47 Sec - 1 CNT - 0.044 % Longplots 0.0015 % Total 48 Sec - 2 CNT - 0.088 % Longplots 0.0029 % Total 49 Sec - 2 CNT - 0.088 % Longplots 0.0029 % Total 51 Sec - 6 CNT - 0.26 % Longplots 0.0087 % Total 52 Sec - 3 CNT - 0.13 % Longplots 0.0044 % Total 57 Sec - 6 CNT - 0.26 % Longplots 0.0087 % Total 63 Sec - 2 CNT - 0.088 % Longplots 0.0029 % Total 69 Sec - 1 CNT - 0.044 % Longplots 0.0015 % Total 73 Sec - 2 CNT - 0.088 % Longplots 0.0029 % Total 79 Sec - 1 CNT - 0.044 % Longplots 0.0015 % Total 85 Sec - 3 CNT - 0.13 % Longplots 0.0044 % Total 89 Sec - 1 CNT - 0.044 % Longplots 0.0015 % Total 91 Sec - 3 CNT - 0.13 % Longplots 0.0044 % Total 92 Sec - 2 CNT - 0.088 % Longplots 0.0029 % Total 97 Sec - 5 CNT - 0.22 % Longplots 0.0073 % Total 132 Sec - 2 CNT - 0.088 % Longplots 0.0029 % Total 153 Sec - 1 CNT - 0.044 % Longplots 0.0015 % Total 166 Sec - 1 CNT - 0.044 % Longplots 0.0015 % Total 189 Sec - 1 CNT - 0.044 % Longplots 0.0015 % Total 206 Sec - 1 CNT - 0.044 % Longplots 0.0015 % Total 213 Sec - 1 CNT - 0.044 % Longplots 0.0015 % Total 297 Sec - 1 CNT - 0.044 % Longplots 0.0015 % Total 298 Sec - 1 CNT - 0.044 % Longplots 0.0015 % Total 430 Sec - 1 CNT - 0.044 % Longplots 0.0015 % Total 503 Sec - 1 CNT - 0.044 % Longplots 0.0015 % Total 524 Sec - 1 CNT - 0.044 % Longplots 0.0015 % Total 526 Sec - 1 CNT - 0.044 % Longplots 0.0015 % Total 528 Sec - 1 CNT - 0.044 % Longplots 0.0015 % Total
Thursday, June 17, 2021
Upload my chia stats to the cloud baby
DATE=`/usr/bin/date` echo $DATE >> /var/log/chia.status.upload.log /root/bin/chia.status.up.exp
Which runs the following expect script
root@ms2:~/bin# cat chia.status.up.exp #!/usr/bin/expect -f set timeout -1 spawn $env(SHELL) match_max 100000 send -- "scp -P 2233 /var/log/chia.status.html uscopley@barilin.com:/home/uscopley/public_html/vpls/" expect -exact "scp -P 2233 /var/log/chia.status.html uscopley@barilin.com:/home/uscopley/public_html/vpls/" send -- "r" expect -exact "d: " send -- "XXXXXX" expect -exact "#" send -- "exitr" expect eof (venv) root@ms2:~/bin#